Wallbox Copper SB

Wallbox Copper SB is adapted for commercial and semi public use. With the introduction of a universal socket, the charger is suitable for both Type 1 and Type 2 vehicle connectors. Access control is managed through RFID. The Copper SB is an intelligent device that is always connected to the myWallbox charging management platform. As a result, multiple users can be monitored and available power can be distributed amongst various chargers.

Make An Enquiry

Technical Specifications

Connector Type

Type 2 Socket (IEC 62196-2

Charging Method

Method 3


260x192x113 mm


2 kg

Operating Temperature

-25ºC to 40 ºC

Storage Temperature

-40ºC to 70 ºC

CE Mark

EMCD 2014/30/EU

Maximum Output

C7.4 kW (1P) / 22 kW (3P)

Input Voltage

110 / 230V AC ± 10%
(1P) / 400V AC ± 10%

Maximum Current

32 A, 5×6 mm² cable, Charging current configurable from 6 A to 32 A

Rated Frequency

50 Hz / 60 Hz

Protection Rating

IP54 / IK08

Surge Category


Residual Current Detectiony

AC 30mA / DC 6mA


External RCCB required


Bluetooth, WiFi, Ethernet


  • Socket connector is universally accepted by all plug-in vehicle types.
  • The authentication of multiple users can be done through both RFID and the app.
  • Controlling multiple chargers is possible through Power Sharing Smart and real time monitoring is available on myWallbox.
  • Beautifully designed and manufactured, this product will make a real statement about your company.

Special Wallbox Feature

All Wallbox charge stations offer users the ability to adjust and set the charge current (within the limits of the electrical installation determined by the electrician at time of installation) from a minimum of 6amp up to the limit of the unit. This allows you to tune your charger to your individual charging requirements with the ability to ramp it up when necessary for days of larger distances travelled.

Reducing the load your charger is pulling is better for the environment, the electricity network and your installation, it reduces the impact of EV charging on the infrastructure – take what you need, when you need it. Charging as fast as possible is in most cases unnecessary, so charging over a longer time at a lower current will have the least impact on the electricity supply. The myWallbox app makes it fast and simple to adjust the charge rate.


Personal Details
Product Details